Which shrink wrap packaging method you choose will depend on the type of product to be wrapped, whether the main purpose of the shrink wrap is for presentation and appearance, or for  product protection during transport and storage, or as an economical and attractive alternative to cartons and boxes.

Shrink wrap packaging is most typically done with (1) an L-Bar sealing machine, or (2) a Sleeve wrapping machine (also referred to as a Bundle wrapping machine). These two packaging methods are illustrated in the following diagram.

L-Bar sealing utilises center-folded shrink film meaning that one side of the film is open while the opposite side is folded to form a U-shaped envelope. The product is inserted into the U-shape between the top and bottom layers of film and the L-shaped sealing bar welds the film closed around the product. The L-Bar sealing system results in a completely enclosed pack which then passes through a hot air shrink tunnel to shrink the film tightly around the product.

L-bar method

Sleeve wrapping, by comparison, utilises two rolls of flat film, usually mounted above and below the product, which are welded together by a straight sealing bar to form a web through which the product is pushed. This results in an open-ended sleeve being formed around the product. After passing through a shrink tunnel, the film shrinks around the product leaving the pack with open ends (sometimes referred to as bulls-eye ends).

Sleeve/bundle method

Practical Applications
These two wrapping systems lend themselves to a huge variety of shrink packaging applications.

Completely enclosed shrink packs (produced on L-Bar sealing machines) are often used in retailing, where product presentation, appearance and tamper evidence is of utmost importance. Typical applications include:

• confectionery and chocolate boxes,
• stationary products including greeting cards, reams of paper and diaries
• CD sleeves and computer disks
• cosmetic and make-up cartons, shampoo bottles and hair-spray
• kitchen flat packs, lacquered doors, timber mouldings and hardware products

Open ended shrink packs (produced by Sleeve wrapping machines) are most commonly used in distribution and warehousing where products are packed in bulk and a cheap alternative to cartons provides savings and economy. Sleeve wrap can be applied around bulk trays of product or free-standing, collated product in 6, 12 or 18 pack configurations for example. Applications include:

• Bottled water and beverages in bulk packs or on trays
• Processed products like flour, sugar and rice packs
• Ice-cream tubs for bulk distribution

Call us if you would like to discuss the shrink wrap packaging of your product in detail or to arrange an obligation free packaging trial.